* The product may differ in size and color from the image.
Article no.: 7821
8 x 12 Portable Garage Tent, PE 450, Dark Green
Economy
- Powder-coated steel poles provide corrosion resistance
- Lightweight yet durable Polyethylene (PE) roof tarp is easy to handle during assembly
- 450 N roof tarp features welded seams for 100% Weather resistant protection
- Single-piece roof tarp adds additional stability
- Large base plates on pole ends enhance stability and allow for ground anchoring
Delivery Cost
Free Delivery to Continental US (not available in AK/HI/CA)
$349.00
1
available immediately
Delivery within 2 - 6 days
Product Inquiries and Expert Advice
Specifications
| Area | Approx. 93.00 ft² |
| Width | Approx. 7.87 ft. |
| Length | Approx. 11.81 ft. |
| Eaves Height | Approx. 6.40 ft. |
| Peak Height | Approx. 7.87 ft. |
| Number of Entrances | 1 |
| Door Dimensions (WxH) | Approx. 6.23 x 6.23 ft. |
| Number of Boxes | 2 |
| Total Weight | Approx. 80.25 lbs |
Frame
Unmatched stability for temporary setups
1
2
3
* The product may differ in size and color from the image.
Tarpaulins and Gates
Sturdy, easy to handle, weather resistant
1
2
3
* The product may differ in size and color from the image.
Assembly
Set up is this easy
- 2 people
- 2 hr(s) on average
- Download Instructions Here
- Assembly Instructions
- Safety instructions
* Video shows the assembly sequence. Product may vary in size, colour and model features.
Included in Package
* The product may differ in size and color from the image.
- Steel frame
- Tarpaulin set:
- Tunnel tarpaulin
- 1 gable panel with entrance
- 1 gable panel without entrance
- Bungees
- Anchoring stakes
- Guy ropes
- Assembly instructions
- Assembly tool
Accessories
Safety Instructions
- Wind and snowloads have not been tested for this tent.
- Ensure the tent is assembled correctly and, in the event of light snowfall, remove snow from the roof immediately. In case of wind, you are advised to use our tie down kit. In case of strong winds and heavy snowfall we recommend temporary disassembly.
- Please observe the enclosed safety instructions and the notes in the assembly manual..
*25 According to the standard "DIN EN ISO 13934-1", the tensile strength is determined using a strip test method with a 50 mm x 50 mm (1.97 in x 1.97 in) sample of the tarpaulin. The value indicates the tensile force required to break the tarpaulin per 50 mm (1.97 in) of width in the lengthwise direction.